Use OS10 as Aggregator

In this test case the goal is to create a simple load balancer using a reverse LAG port. The idea is to have one input port which is then mirrored to a logical LAG port and at the other end of the LAG port is a number of security sensors.

Helpful Links

ONIE Network Install Process Overview

My Configuration

OS 10 Version

OS10(config)# do show version
Dell EMC Networking OS10 Enterprise
Copyright (c) 1999-2020 by Dell Inc. All Rights Reserved.
OS Version: 10.5.1.0
Build Version: 10.5.1.0.124
Build Time: 2020-02-12T09:05:20+0000
System Type: S4112F-ON
Architecture: x86_64
Up Time: 00:05:09

Configure Device for LAG

Physical Configuration

2 10Gb/s fiber SFPs one each connected to two separate VMs. These will serve as our traffic generators. A third 10Gb/s SFP is plugged into a third VM and this will serve as our receiver.

Configuration

Configuration

Test Scenario

I played a PCAP made up entirely of HTTP from port 1 and PCAP made entirely of DNS from port 2 and then listened on the VM attached to port 3. Confirmed, all traffic showed up on port 3 as expected.